Input Ts - Promax PROLINK-4/4C Premium Manual De Instrucciones

When turning the rotary selector [4] a change of the frequency or channel tuned is
made, updating the visualised measures.
REMARK: When the spectrum analyser mode is used, it is advisable to set a suitable
value for the input level by means of the Reference Level function (see
section 4.10.1.3). Also the acquisition mode Maximum Hold must be set
using the Acquisition mode function from the functions menu.
In order to close the measurement press the rotary selector [4] and select the End
Wi-Fi option from the FUNCTIONS menu.

4.9.4.16 Input TS

The Input TS function enables the Transport Stream MPEG-2 / DVB signals to
be controlled. There are three possibilities:
Automatic
Internal TS
External TS
To select the Scart operation mode, access the TV mode functions menu for
digital channels, turn the rotary selector [4] to the Input TS function and press to
activate it. The monitor will show a screen labelled TRANS. STREAM displaying the
three available options (as well as the Exit option). Turn the rotary selector [4] to the
mode you require, then press to activate it.
Page 86
Figure 55.- Wi-Fi power measurements.
Represents the TS coming from the input connector [40] or
otherwise, from the internal demodulator.
Represents the TS generated by the internal demodulator.
Represents the external TS coming from the input connector [40].
USER'S MANUAL. PROLINK-4/4C Premium
06/2005