Selecting The Sound Mode (Sound) - Promax PROLINK-4/4C Premium Manual De Instrucciones

USER'S MANUAL. PROLINK-4/4C
Figure 62.- Channel power measurement in Spectrum Mode.
When measuring Channel power, on the lower part of the image appears the
tuned frequency (or channel), the channel bandwidth (Channel BW) and the Channel
Power.
To measure the channel power, first of all it is necessary to define channel
bandwidth, that is to say to set the limits of the integration: select the Channel
bandwidth function in the functions menu and then, again in the Spectrum mode, turn
the rotary selector to modify it or well press key
will be erased and using the keyboard introduce the new value. Finally accede to the
functions menu again and execute the Marker function in order you can tune new
carrier frequencies, then when turning the rotary selector, the tuning marker and the
channel bandwidth limits will shift together.
To measure digital channels power correctly it is indispensable to tune channel at its
central frequency and to define channel bandwidth.

4.11 Selecting the Sound Mode (SOUND)

From the TV operating mode, analogue mode, press key
will show the SOUND menu with the types of sound available. Turn the rotary selector
[4], choose the type of sound you wish and then press key
selector [4] to activate it. Table 4 shows the different options for the sound mode.
06/2005
Premium
[31], current channel bandwidth
IMPORTANT REMARK
[26]. The screen
[26] or the rotary
Page 99