Tone Function; Selecting Nicam Sound - Promax PROLINK-4/4C Premium Manual De Instrucciones

USER'S MANUAL. PROLINK-4/4C
The PROLINK-4/4C
tuned FM frequency, as well as the balance of the number of received erroneous blocks
(EBB). (See figure 63).
When pressing the key
data.
In order to exit FM function, select
pressing the key

4.11.2 Tone function

When the LV function is selected, the speaker of the PROLINK-4/4C
permits a tone whose frequency depends on the level of the signal received. This is
very useful when installing antennas, since the user can locate the peak signal without
having to look continually at the monitor of the level meter.

4.11.3 Selecting NICAM sound

When the NICAM option is selected, it is possible to measure the Bit Error Rate of
the modulation. To obtain this measurement, from the TV operating mode, level
measurement, press key
measurement information displayed on the screen (name assigned to memory, power
supply to external
frequency/channel). In the position relative to the type of Sound will appear the
information about the type of NICAM according to:
06/2005
Premium
Premium also shows the level of the received signal and
Figure 63.- RDS service information.
[2] takes place an update of the emission received
[26].
[2] in order to activate the mode of maximum
units, sound, colour
a measurement from SOUND menu by
system, TV standard,
Premium
level and
Page 101