Promax PROLINK-4/4C Premium Manual De Instrucciones página 239

USER'S MANUAL. PROLINK-4/4C
2. Press key
configuration parameters. Then turn the rotary selector [4] to the memory number
that you wish to store the configuration in (from 1 to 99). This number
corresponds to the column headings of the Datalogger function.
If a configuration is stored in a memory location already containing information,
that data will be lost.
3. (Optional) If you wish to assign a name to a memory position press key
the first character of the name will blink, turn the rotary selector [4] and the
different characters will appear in the first position of the configuration name.
When you have chosen the first character press the rotary selector again [4] to
automatically move on to the second character. Repeat the process for a
maximum of four characters.
4. (Optional). When the equipment works in digital mode, press the key
to accede to the measurement function that you wish to set-up and select the
parameter to store with the rotary selector [4]; BER or MER for QAM modulations;
BER, CSI or MER for COFDM and MER, VBER (BER after Viterbi) or CBER
(BER before FEC) for QPSK, and for DAB signals; CBER (Coded BER) and SNR.
5. (Optional) A memory position may be assigned to the name of a previously edited
DiSEqC program, thereby associating it with the execution of the memorised
measuring configuration.
Whenever it is established a satellite configuration will appear the DiSEqC
parameter. In order to activate it, accede by means of the key
pressing the rotary selector [4] to view the list of edited programs (See section
'4.9.4.20 DiSEqC Command Generator') and select the program to execute.
Figure 64.- STORE screen, storing a measuring configuration.
06/2005
Premium
[25] until the monitor displays the STORE screen. Check the
[31],
[ 31]
[31] and
Page 103