Power Cord And Grounding Instructions - Tunturi RUN 3.0 Manual Del Usuario

Part# Description
A Screw M8x20L
B Washer Ø8xØ18
C Washer Ø10xØ25
D Screw M4x6L
E Allen Key
F Screwdriver
G Safety Key
H Side Cap
I Lube
J Incline Bracket Cover
Lift up the upright, then place the screws (A) and
washers (B, C) inside holes at the bottom of the
upright. Use the screwdriver (F) to tighten them
well.
Put the console to the correct position. Use the allen
key (E) to tighten the screws (A) and washers (B)
inside holes at the top of the upright.
Attach side cap (H) with the screws (D) at the bottom
of the upright, and tighten them well.
Q´TY
6
2
4
6
1
1
1
2
1
2
POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord into the
treadmill at the left front corner. Before connecting
the device to a power source, make sure that local
voltage matches that indicated on the type plate.
The treadmill operates at 110 V or 230 V.
This treadmill must be grounded. If it should
malfunction or breakdown, grounding provides
a path of least resistance for electrical current to
reduce the risk of electrical shock. This product
is equipped with a cord having an equipmentgrounded
conductor and a grounding plug.
The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Do not use extension cables when connecting the
equipment to the power source.
DANGER! Improper connection of the
equipmentgrounding conductor can result in a risk of
electric shock. Check with a qualified electrician or
serviceman, if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided with the product - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
3
Run 3.0 - OWNER'S MANUAL ENGLISH