Specifications - Mettler Toledo IND560 Guia De Instalacion

IND560 Installation Manual

Specifications

The IND560 terminal conforms to the specifications listed in Table 1-1.
Enclosure Type
Dimensions (l × w × d)
Shipping Weight
Environmental Protection
Operating Environment
Hazardous Areas
Power
Power Consumption
1-4
Table 1-1: IND560 Specifications
IND560 Specifications
Panel-mount stainless steel front panel with an
aluminum frame
Harsh environment desk/wall/column-mount type 304L
stainless steel enclosure
Panel Mount: 265 mm × 160 mm × 92 mm
(10.4 in. × 6.3 in. × 3.6 in.)
Harsh Environment: 265 mm × 160 mm × 170 mm
(10.4 in. × 6.3 in. × 6.7 in.)
3.5 kg (8 lb)
Panel-mount front panel sealing is UL-approved, and
provides type 4x and type 12 protection – comparable
to IP65 rating
Harsh Environment is UL-approved, and meets IP69K
requirements
The terminal (both enclosure types) can be operated at
temperatures ranging from −10° to 40° C (14° to
104° F) at 10% to 95% relative humidity non-
condensing.
Not all versions of the IND560 can be operated in areas
classified as Hazardous by the National Electrical Code
(NEC) because of the combustible or explosive
atmospheres in those areas. Contact an authorized
METTLER TOLEDO representative for information about
hazardous applications.
Operates at 85–264 VAC, 49–61 Hz, 750 mA (both
enclosure types).
Panel-mount version provides a terminal strip for AC
power connections.
Harsh environment version includes a power cord
configured for the country of use.
Note: When an IND560 is installed in an area classified
as Division 2 or Zone 2/22, special AC wiring
requirements must be met. See document 64060405,
IND560 Division 2, Zone 2/22 Installation Guide.
Refer to Table 1-2