Sony MDX-C800REC Manual De Instrucciones página 16

2 Press the (+) side of (SEEK/AMS) after
locating the desired character.
If you press the (–) side of (SEEK/AMS),
you can move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
To return to normal CD play mode, press
(ENTER).
Tips
• To erase or correct a name, enter "
character.
• There is another way to start labelling a CD: Press
(LIST) for 2 seconds instead of performing steps
2 and 3. You can also complete the operation by
pressing (LIST) for 2 seconds instead of step 5.
• You can label CDs on a unit without the CUSTOM
FILE function if that unit is connected along with
a CD unit that has the function. The disc name
will be stored in the memory of the CD unit with
the CUSTOM FILE function.
Note
Repeat play, shuffle play, and programme play will
be suspended until Name Edit mode is over.
16
Displaying the disc memo
Press (DSPL/PTY) during CD or CD TEXT
disc playback.
Each time you press (DSPL/PTY) during CD
or CD TEXT disc playback, the item
changes as follows:
" for each
1 If you use personalised labels, they will
*
always take priority over the original CD
TEXT information when such information is
displayed.
2
If you connect an optional CD unit with the
*
CD TEXT function, the CD TEXT information
will appear on the display when you play a
CD TEXT disc.
3 While the AF/TA function is activated.
*
Note
Some letters cannot be displayed during MD or CD
TEXT disc playback.
Disc memo
V
Disc memo name*
V
2
Track name*
V
FM frequency or station name*
1
3