Erasing tracks in a programme
1
During CD/MD playback, press (MENU),
then press either side of (DISC/PRST)
repeatedly until "PGM Sel" appears.
2
Press (ENTER).
3
Press either side of (DISC/PRST)
repeatedly to select the programme
number with the track you want to
erase.
4
Press (ENTER) for 2 seconds.
The selected track is erased, and the
succeeding tracks are renumbered.
5
Press (MENU) twice.
Labelling a CD
(For a CD unit with the CUSTOM FILE
function)
You can label each disc with a personalised
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate the disc
by name (page 17).
1
Start playing the disc you want to label.
2
Press (MENU), then press either side of
(DISC/PRST) repeatedly until "Name
Edit" appears.
3
Press (ENTER).
Name Edit mode
The unit will repeat the disc during the
labelling procedure.
4
Enter the characters.
1 Press the (+) side of (DISC/PRST)
repeatedly to select the desired
characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t <
t . t
)
If you press the (–) side of (DISC/PRST)
repeatedly, the characters will appear in
reverse order.
If you want to put a blank space
between characters, select "
continue to next page t
— Disc Memo
."
15