Sony MDX-C800REC Manual De Instrucciones página 19

6
Press (MD REC) again to start recording.
MD's track No.
The unit locates the beginning of the
selected track and starts recording.
Then "z" stops flashing and the buttons for
recording ((MD REC), (REC STOP), and
(REC MENU)) light in red.
When the recording of the track is
completed, the unit beeps and
automatically stands by for further
recording while the CD or MD continues to
play.
To cancel the recording or recording stand-by,
press (REC STOP).
Inserting the MD to record upon
afterwards
You can still start recording even if a CD or
MD in the connected CD/MD unit is already
playing and an MD is yet to be inserted into
this MD recorder.
1
Press (MD REC).
2
Insert an MD while "REC NO Disc" is
displayed (within 10 seconds after
step 1).
3
Press (REC MENU) repeatedly until "Track
REC" appears.
4
Press (MD REC) again to start recording.
Note
Be sure to insert an MD while "REC NO Disc" is
displayed. If the indication disappears, recording
stand-by is cancelled.
MD's elapsed
recording time
Continuing recording after turning
the ignition off
— REC Continue mode
1
Press (OPEN) and insert the MD to be
recorded on.
2
Play the CD or MD from which you want
to record.
3
Press (MD REC).
4
Press (REC MENU) repeatedly to select
"Disc REC," "Track REC," or "PGM REC."
5
Press (MD REC) again to start recording.
6
Press (REC MENU) repeatedly until
"Continue on" appears.
Recording continue indication
7
Turn the ignition off and detach the
front panel before you leave the car.
During REC Continue mode, the unit keeps
beeping to indicate the state of the unit, and
stops beeping when recording is
completed. When you turn the ignition to
the ACC position and attach the front panel
again, "REC Complete!" appears on the
display if recording is completed
successfully.
Notes
• Frequent use of REC Continue mode feature may
cause battery drain. Make sure that the battery is
well charged.
• Be sure not to start the engine of the car again
during REC Continue mode. Recording may fail.
19