Radio; Storing Stations Automatically; Best Tuning Memory (Btm); Storing Only The Desired Stations - Sony MDX-C800REC Manual De Instrucciones

Ocultar thumbs Ver también para MDX-C800REC:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54

Radio

Storing stations
automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest
signals and stores them in the order of their
frequency. You can store up to 6 stations of
each band (FM1, FM2, FM3, MW, and LW).
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly to select the
radio.
Each time you press (SOURCE), the source
changes as follows:
B Radio (band indication)
MD b
* If the corresponding optional equipment is
not connected, this item will not appear.
2
Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:
B FM1
B FM2
DAB* b
* This item is displayed only if the optional DAB
tuner (XT-100DAB) is connected.
3
Press (MENU), then press either side of
(DISC/PRST) repeatedly until "BTM"
appears.
4
Press (ENTER).
The unit stores stations in the order of their
frequency on the number buttons.
A beep sounds when the setting is stored.
Notes
• The unit does not store stations with weak
signals. If only a few stations can be received,
some number buttons will retain their former
settings.
• When a number is indicated on the display, the
unit starts storing stations from the one currently
displayed.
• If an MD is not in the unit, only the radio band
appears, even if you press (SOURCE).
CD* b
B FM3
LW b
MW b
Storing only the desired
stations
You can preset up to 18 FM stations (6 each for
FM1, FM2, and FM3), up to 6 MW stations,
and up to 6 LW stations in the order of your
choice.
1
Press (SOURCE) repeatedly to select the
radio.
2
Press (MODE) repeatedly to select the
band.
3
Press either side of (SEEK/AMS) to tune
in the station that you want to store on
the number button.
4
Press the desired number button ((1) to
(6)) for 2 seconds until "Memory"
appears.
The number button indication appears on
the display.
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
29

Publicidad

Tabla de contenido
loading

Tabla de contenido