By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate and
hold the control to find a specific station.
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations stored on the number
buttons.
•Change the disc*.
* When an optional CD/MD unit is connected.
42
Other operations
Rotate the VOL control to
adjust the volume.
Press (DSPL) to change
the displayed item.
Note
If your car has no ACC (accessory) position on the
ignition switch, be sure to press (OFF) for 2
seconds to turn off the clock indication after
turning off the ignition.
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
To increase
To decrease
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for 2 seconds while
pushing the VOL control.
Tip
You can also change the operative direction of
these controls with the unit (see "Changing the
sound and display settings" on page 43).
Press (ATT) to
attenuate the
sound.
Press (OFF) to
stop playback or
radio reception.
Press (SOUND) to
adjust the volume and
sound menu.