Denon AVR-3802 Instrucciones De Operación página 21

4
Use the £ and _' cursor buttons to dsplay
"RESET PRE" on the remote control unit, then
press the ENTER button
• After "BEL PRE" is displayed on the remote
control unit's display, the registered preset
memory is displayed on the remote control
unit's display
5 Use the and :_ cursor buttons
to select the code to be reset
(3) Resetting "learned" buttons
Press the power ON/SOURCE butto_ and the
OFF button at the same time
• "SET UP" appears on the remote co_ltrol
unit's display
2 Press the ENTER button
Use the and cursor buttons to dsplay
"RESET" on the remote control unit's display,
then press the ENTER button
• r'RESET PRE" is displayed
When the mode you waist to reset is shown on
the remote control unit's displayr press the
ENTER button to reset the preset memory
7
"CONFIRM" is dsplayed To reset the preset
memory, press the ENTER button while
"CONFIRM" is displayed
• "COMPLETE" appears on the remote control
unit's display
(4) All reset function
• This function is for resett ng all the sett ngs to the
factory defaults
Press the power ON/SOURCE button and the
OFF butto_ at the same time "SET UP r'
appears on the remote control unit's display
2
Press the ENTER butto_
1
3,4
2,3,4,5
1
3,4,5
2,3,4,5,6
Use the and cursor butto_ls to display
"RESET" on the remote control unit, then press
the ENTER button¸
Use the ,, and cursor butto_ls to display
"RESET ALL" on the remote control unit, then
press the ENTER button¸
5
"CONFIRM" is displayed To reset, press the
ENTER button while "CONFIRM" is displayed
• "BUSY" is displayed during the resetting
operation, and "COMPLETE" is displayed
once resetti_g is completed
4
Use the ' and ' cursor buttons to display
"RESET LRN" on the remote co_trol unit's
display, then press the ENTER button
• r'SEL MODE" is displayed, then "TV"
appears
Use the 1, and }' cursor buttons to select the
mode of the button to be reset, then press the
ENTER button
6
"CONFIRM" is displayed Tu reset
the "learned" button for the
selected mode, press the ENTER
button while "CONFIRM" is
displayed
21