Denon AVR-3802 Instrucciones De Operación página 25

(4] Combining the currently playing sound with the desired image
Simulcast playback
Usetbisswitchtomorfitoravideosourceother /[_O' IF ]_ Q ]
than the audio source . . : : :
Press the VIDEO SELECT V,_EOS_LEC_ OOOO . .
button repeatedly until the b
desired source appearson _ o ZOZ
the display
Mir un tl _
1
Cancelling simulcast playback
• Select "SOURCE" using the VDEO
SELECT button
• Switch the program source to the
component connected to the video input
[5] Checking the currently playing program source, etc.
On screen display
• Each time an operation is
performed, a description of
that operation appears on
tile display connected to the (RelYote c oltrol Jnit)
unit's VIDEO MONITOR OUT
jack
Also, the unit's operating status can be
checked during playback by pressing the
remote control unit's OSD button
Such information as the position of the input
selector and the surround parameter settings
is output in sequence
Front panel display
• Descriptions of the unit's ST_US
operations are also displayed
on the front panel display
In addition, the display can
be switched to check the (M_irurlt)
unit's operating status while
playing a source by pressing
the STATUS button
! _0_ ,
Using the dimmer fu,ctio, _,_,_
• Use this to change the brightness of
the display
The display brightness changes in
four steps/bright, medium, dim and (M_ir_nt)
off} by pressing the remote co_trol
unit's DIMMER button repeatedly
The bdghtness cha_ges i_ 3 steps each time the
butto_ is pressed, a_d finally the display turns off
[1] Playing one source while recording another (REC OUT mode)
Press the REC/MULTI button *;c
_ULTI
{M_in unit)
With "RECOUT SOURCE"
displayedr turn the FUNCTION
knob to select the source you
wish to record
• The "REC" ndicator and the iM_n Jnit)
indicator of the selected
source light
Set the record ng mode
• For operating nstructio_ls, refer to the mallual
of the component on which you want to
record
To cancel, turn the functo_
knob and select "SOURCE"
• When "SOURCE" is selected,
the "REC" indicator turns off
iMarl Jl_it)
2,4 2
I '1©
1
Display 2
i:;;:ii[[: C 0 UT :_i:::ii...i B:i':: E
NOTES:
• Recording sources other than digital inputs
selected in the REC OUT mode are also output to
the multi source audio output jacks
• Digital signals ale not output from the REC
SOURCE or audio output iacks
[2] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)
Press the REC/MULTI button nEc
MU_TI
The display switches as follows
each time the button is pressed¸
{M_in unit)
With "M-SOURCE SOURCE"
displayed, turn the FUNCTION
knob and select the source you
wish to output
• The "MULTI" indicator and {ManJnit)
the indcator of the selected
source light
Start playing the source to be output
• For operating instructions, refer to the
manuals of the respect ve components
To cancel, turn the functon
knob and select "SOURCE"
• When "SOURCE" is selected,
the "MULTI" indicator turns
off iMar I Jl_it)
2,4 2
1
Display 2
I I
NOTES:
• The signals of the source selected in the MULTI
mode are also output from the VCRq, VCR-
2/VAUX and CDR/TAPE recording output
terminals
• Digital signals are not output from the mugi
source audio output jacks
25