Denon AVR-3802 Instrucciones De Operación página 22

• The set is equipped with a function for searching for the registration number if you do not know the preset
code {a 4-dig t number) when setting the preset memory
For TV DBS or CABLE components, turn on the
component's power For CD, MD, TAPE, DVD,
VCR and VDP component's, turn on the
component's power and load a disc or tape
2
6
2
Press the power ON/SOURCE button and the
OFF button simultaneously
• "SET UP" appears on the remote control
unit's display
4,5
3,4,5,7
Press the ENTER button
Use the and ' cursor buttons to display
"AUTOSEARCH" on the remote control unit,
then press the ENTER button¸
5
Use the * and cursor buttons to display the
mode of the component to be searched for on
the remote control unit's display, then press the
ENTER button
• The registration codes are transmitted in
order
If you press the power OFF button late at step 6,
press the, and cursor button once to move to
the next code or back to the previous code one
step at a time
J, butto_: Next code
button: Previous code
Auto search resumes when you move ahead from
the code at which you stopped
[] OPERATION
Refer to "CONNECTIONS" (pages 4 to 8) a_d
check that all connections are correct
2 Select "AMP" using the RECEIVER button
(only when operating with the remote control
unit)
%
Re _te contro u/J9
Turn on the power
Press the POWER operation switch (button)
_L_ghts
• _ ON/STANDBY
The power turns on and "ON/STANDBY"
indicator s light
Several seconds are required from the time
the power operation switch is set to the "_
ON/STANDBY" position until sound s output
This s due to the built-in muting circuit that
prevents noise when the power switch is
turned on and off
Set the power operation switch to this
position to turn the power on and off from the
included remote control unit (RC-884)
• Im OFF
The power turns off and "ON/STANDBY"
indicator s off
In this position, the power cannot be turned
on and off from the remote control unit (RC-
884)
[=,o {,..:::
oooo . .
[C: :°:
3
6
When the component operates,
press the POWER OFF button
• The mode and the registered
number appear on the remote
control unit's display
The channel switches on the TV, DBS or CABLE
device and playback stops on a CD, MD, tape,
DVD, VCR or VDP player
Press the ENTER buttol/
• "COMPLETE" is displayed on the
emote col/trol uTlit's display and the
selected code is preset
22