Cleaning And Care; What If There Are Problems - Beurer UB 90 Instrucciones Para El Uso

With the anti-allergy temperature setting, you can fi ght back against the mite population and
create a dry, mildew-free bed environment.
For this, set the body and foot area temperatures to level 9 and the automatic switch-off time
to 12 hours. "Anti-Allergy" is shown in the display.
In order to prevent heat being lost, the electric underblanket must be completely covered by
the duvet for this process.
This process dries out your mattress and thereby creates a hostile microclimate for the mites.
We recommend regular use of the anti-allergy temperature setting. Ideally, the electric under-
blanket should be operated for the full 12 hours.

4. Cleaning and care

Before cleaning the electric underblanket always disconnect the mains plug from the
socket and unplug the plug-in coupling [8] and thereby the switch [1] from the electric
underblanket.
The switch must never be submerged in water or other liquids.
To clean the electric underblanket and switch, use a dry, lint-free cloth. Do not use any chemi-
cal or abrasive cleaning agents.
Small spots can be removed with a cloth or damp sponge and if necessary a little mild liquid
detergent.
The electric underblanket is machine-washable. Set the washing machine to an extra-delicate
wash cycle, at 30 °C (for instance a wool cycle – low mechanical stress, washing machine drum
fi lled to low level). Use a delicate laundry detergent and follow the manufacturer's instructions.
Note that the electric underblanket must not be dry cleaned, wrung out, machine dried or ironed.
Note that the electric underblanket will suff er from too frequent washing. For its entire life, there-
fore, the electric underblanket should be washed not more than 5 times in a washing machine.
Do not hang up the electric underblanket with clothes pegs or similar to dry it.
On no account switch on the electric underblanket to dry it.
Only reconnect the switch to the electric underblanket after the plug connection and the
electric underblanket are completely dry.
5. Storage
Allow the electric underblanket to cool down before storing it away.
The electric underblanket must not be folded sharply.
Do not place any items on top of the electric underblanket while it is stored away.
Store the electric underblanket in the original packing in a dry environment, ensuring it is not
weighed down by additional items if it is not going to be used for a prolong period of time.

6 What if there are problems?

Problem Cause
Display does The mains plug is not connected to
not light up/no the socket and/or not switched on.
display.
The safety system switches off the
electric underblanket.
"E1" appears on The switch is not properly connected
the display. to the electric underblanket.
Solution
Connect the mains plug and switch on
the electric underblanket.
Send the electric underblanket to cus-
tomer service.
1. Switch off
2. Connect the plug-in coupling correctly
3. Switch on
14