Cutting Wheels; Composite Resin Cutting Wheels; Diamond Cutting Wheels - Stihl TS 700 Manual De Instrucciones

Cutting wheels

Cutting wheels are exposed to
extremely high loads especially during
freehand cutting.
The cutting wheels, which have been
developed by STIHL in cooperation with
renowned manufacturers of abrasive
wheels, are of high quality and tailored
precisely to the respective intended use
as well as the engine performance of the
cut-off machine.
They are of consistently outstanding
quality.
Transport and storage
– Do not expose cutting wheels to
direct sunshine or other thermal
stresses during transport and
storage
– Avoid jolting and impacts
– Stack cutting wheels flat on a level
surface in the original packaging in
a dry place where the temperature
is as constant as possible
– Do not store cutting wheels in the
vicinity of aggressive fluids
– Store cutting wheels in a frost-free
place
TS 700, TS 800
Composite resin cutting
wheels
Economic benefit is improved and
premature wear can be avoided by
choosing and using the correct
composite resin cutting wheel. The short
name (e.g. "asphalt", "concrete")
– on the label and
– on the packaging (table with
recommended uses)
can help to ensure the correct choice.
STIHL composite resin cutting wheels
are suitable, depending on the version,
for cutting the following materials:
– Asphalt
– Concrete
– Stone
– Ductile cast pipes
– Steel
STIHL composite resin cutting wheels
cannot be used to cut railway tracks.

Diamond cutting wheels

Economic benefit is improved and
premature wear can be avoided by
choosing and using the correct diamond
cutting wheel. The short name (see
following explanation)
– on the label and
– on the packaging (table with
recommended uses)
can help to ensure the correct choice.
STIHL diamond cutting wheels are
suitable, depending on the version, for
cutting the following materials:
– Asphalt
– Concrete
– Stone (hard rock)
– Abrasive concrete
– Green concrete
– Clay bricks
– Clay pipes
Diamond abrasive wheels cannot be
used to cut metal.
English
19