Husqvarna P 535HX Manual De Usuario página 23

2. Make sure that the forward
pedal and rearward pedal
are not blocked and can be
operated freely.
3. Push the forward pedal
carefully to move forward.
4. Release the forward pedal to
brake. Make sure that the
brake engages when the
forward pedal is released.
Note: The product has an
automatic brake that
engages when you release
the pedals. For more brake
power when you decrease
the speed, push the other
pedal.
5. Do the same procedure for
the rearward pedal.
Parking brake
The product has a manual
parking brake and an automatic
parking brake. The automatic
parking brake engages when
the product is stationary.
WARNING: The
automatic parking brake
is not sufficient to park
the product safely. Do a
check of the manual
parking brake daily and
adjust it if it is necessary.
1591 - 001 - 21.12.2020
To do a check of the manual
parking brake
1. Park the product on a hard
surface that slopes.
WARNING: Do not
park the product on a
grass slope when you
do a check of the
parking brake.
2. Pull the parking brake lever
fully rearward into the
parking brake holder.
3. If the product starts to move,
let an approved service
agent adjust the parking
brake.
4. Pull the parking brake from
the parking brake holder and
forward to release the
parking brake.
Roll Over Protection Structure
(ROPS)
ROPS is a protective frame that
decreases the risk of injury if
23