Husqvarna P 535HX Manual De Usuario página 45

To remove the cover of the battery cooling
system
1. Remove the 2 screws and remove the cover.
To remove the service hatch
1. Remove the 2 screws and lift off the service hatch.
To remove the service lid
1. Turn the 2 screws ¼ turn counterclockwise to open
them.
2. Pull the service lid rearward to release it from the
hooks.
1591 - 001 - 21.12.2020
To remove the cover of the fuse box
1. Turn the 3 screws ¼ turn counterclockwise and
remove the cover.
To remove the right side cover
1. Remove the 5 screws and remove the side cover.
To open and remove the engine cover
1. Remove the rubber straps on the right and the left
side of the engine cover.
2. Open the engine cover rearward.
Note:
Loosen the bolts to remove the engine
cover fully.
3. To get full access to the engine, tilt the seat forward.
x2
45