To Clean And Replace The Air Filter - Husqvarna P 535HX Manual De Usuario

To replace the fuses in the fuse box
A broken fuse is identified by a burned fuse wire.
1. Remove the service lid. Refer to
service lid on page 45 .
2. Remove the cover to the fuse box. Refer to
remove the cover of the fuse box on page 45 .
3. Pull out the fuse from the holder.
4. Replace the broken fuse. Refer to
blade fuse on page 46 .
5. Install the covers.
To replace the fuses of the 48 V electrical
system
You find the fuses of the 48 V electrical system behind
the battery cooling system.
1. Remove the servicing plug. Refer to
install the servicing plug on page 46 .
2. Remove the cover to the battery cooling system.
To remove the cover of the battery cooling
Refer to
system on page 45 .
3. Remove the 2 screws on the top of the battery
cooling system and tilt the battery cooling system
forward.
4. Replace the fuse. Refer to
To replace a blade fuse on page 46 .
and
5. Install the battery cooling system and the cover in
opposite sequence.
To replace the fuses of the 12 V electrical
system
You find the fuses on the side of the 12 V battery.
1. Open the engine cover. Refer to
remove the engine cover on page 45 .
2. Turn the main switch to OFF.
1591 - 001 - 21.12.2020
To remove the
To
To replace a
To remove and
Fuse overview on page 6
To open and
3. Push the snap locks on each side of the fuse cover
and pull out the fuse cover.
4. Replace the fuse. Refer to
fuse on page 46 .
5. Install in the opposite sequence.

To clean and replace the air filter

CAUTION:
when the air filter is removed.
1. Open the engine cover.
2. Loosen the 2 latching devices that hold the air filter
cover.
3. Remove the air filter cover.
4. Remove the air filter cartridge from the filter housing.
5. Clean the inner surface of the air filter housing with a
dry cloth.
To replace a bolt-down
Do not start the engine
47