Laser class
Speed of rotation
Self-leveling range
Operating temperature
Storage temperature
Weight (including B12/2.6 battery)
Drop test height (under standard ambient conditions in
accordance with MILSTD810G)
Tripod thread
Protection class in accordance with IEC 60529 (except
battery and battery compartment)
4.2 Technical data for the laser receiver
Indicator range, distance from zero
Laser plane display range
Length of the detection area
Center indication from top edge of casing
Time without detection before automatic power off
Drop test height in the PRA 83 laser receiver holder
(under standard ambient conditions in accordance with
MILSTD810G)
Operating temperature
Storage temperature
Weight (including batteries)
Protection class in accordance with IEC 60529
5 Operating the rotating laser
5.1 Handling the laser and battery correctly
Note
The type B12 battery has no protection class. Do not expose the battery to rain or wet conditions.
In accordance with the Hilti instructions, the battery may be used only with the associated product
and must be inserted in the battery compartment for this purpose.
1. Fig. 1: Working in horizontal mode.
2. Fig. 2: In inclined plane mode, the laser should be lifted at the control panel side.
3. Fig. 3: Laying down or transporting in an inclined position.
◁ Hold the laser so that the battery compartment does NOT face upwards, so that no moisture can
enter.
5.2 Inserting / removing the battery
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Check that the contacts on the battery and on the tool are free from foreign objects before inserting
the battery.
18
English
Printed: 01.09.2017 | Doc-Nr: PUB / 5260626 / 000 / 02
Visible, Laser Class 2,
620-690 nm/Po<4.85 mW ≥ 300 ⁄min;
EN 60825-1:2007; IEC 60825-1:2007
300 /min
±5°
−20 ℃ ...50 ℃
−25 ℃ ...60 ℃
2.44 kg
1.5 m
5/8 in
IP66
±52 mm
±0.5 mm
≤ 120 mm
75 mm
15 min
2 m
−20 ℃ ...50 ℃
−25 ℃ ...60 ℃
0.25 kg
IP66
5
6