SETTING THE ZEROING DISTANCE (
Start with step 1 if you have not previously opened the
menu control, or with step 3 if you have just set the
ballistic curve and
is still flashing in the display.
SId
1.
Press and hold the secondary button
•
appears.
EU.US
2.
Press the secondary button briefly 3x (<2 s).
The display will switch from
3.
By pressing the main button
the desired zeroing distance.
–
[m],
100
–
[m] or
200
–
[m] or
GEE
–
[y] or
100
–
[y] or
200
–
[y].
300
4.
Save your setting by briefly pressing the
secondary button.
• The saved setting is initially lit continuously for
4 s as confirmation, then the display switches
to
and then disappears.
AbC
)
SId
1
(≥3 s).
and
to SId.
bALL
bt
bt
2
repeatedly, select
BALLISTIC OUTPUT FORMATS (
The advanced ballistic compensation (AbC) on the Leica
Rangemaster allows you to display one of the following
three ballistic values after the measured range if
required:
– the equivalent horizontal range (EHr)
– the corresponding holdover (HOLd)
– the number of clicks required on the rapid reticle
adjustment (MOA/clicks)
Both the displayed holdover and
a.
the measured range to the target
b.
the angle of inclination of the weapon
c.
the ballistic curve set,
d.
the zeroing distance set
)
TM
ABC
values factor in:
EHr
EN
51