Tabla de contenido
Publicidad
If you wish to fix the entrance panel to a wall, it is
necessary to have previously installed a means of
attachment (i.e. a flush-mounted box or surface
wall-mounted box). See the appropriate data sheets.
Remove the protecting plugs and the fixing pins
from the flush-mounted box. Choose the two fixing
pins you want to hinge the panel on to, so that it
opens either to the right or to the left or downwards.
D I G I TA L V I D E O D O O R E N T R Y S Y S T E M S
Once the flush-mounted box has been put in place,
remove the reinforcement.
Place the rings of the panel over the extracted fixing
pins. The unused pins should be placed in their
slots.
Publicidad
Tabla de contenido
