When the tool is in operation, the battery charge status is indicated in the display on the tool.
When not in operation, battery charge state can be indicated by lightly pressing the release button.
During charging, charge state is indicated by the LEDs on the battery (please refer to the operating
instructions for the charger).
3.1.9
Items supplied
PR 30-HVS A12 rotating laser, PRA 30 (03) laser receiver / remote control unit, 2 batteries (AA cells), PRA 83
laser receiver holder, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
4
Technical data
4.1
Technical data, rotating laser
Receiving range (diameter) PRA 30 (03)
Communication range (PRA 30)
Accuracy at 10 m (under standard ambient conditions in
accordance with MILSTD810G)
Laser class
Self-leveling range
Operating temperature
Storage temperature
Weight (including battery)
Drop test height (under standard ambient conditions in
accordance with MILSTD810G)
Protection class in accordance with IEC 60529 (except
battery and battery compartment)
Plumb beam
4.2
Technical data for the laser receiver
Indicator range, distance from zero
Laser plane display range
Length of the detection area
Center indication from top edge of casing
Time without detection before automatic power off
Range of remote control unit (diameter) for the PR 30-
HVS
2134493
*2134493*
Printed: 24.04.2018 | Doc-Nr: PUB / 5314337 / 000 / 01
PR 30-HVS A12
2 m ... 500 m
(6 ft - 10 in ... 1,640 ft - 10 in)
150 m
(492 ft)
±0.5 mm
(±0.02 in)
Visible, Laser Class 2,
620-690 nm/Po<4.85 mW ≥ 300 ⁄min;
EN 60825-1:2007; IEC 60825-1:2007
±5°
−20 ℃ ... 50 ℃
(−4 ℉ ... 122 ℉)
−25 ℃ ... 60 ℃
(−13 ℉ ... 140 ℉)
2.5 kg
(5.5 lb)
1.5 m
(4 ft - 11 in)
IP66
Constant beam, perpendicular to the
plane of rotation
±52 mm
(±2.0 in)
±0.5 mm
(±0.02 in)
≤ 120 mm
(≤ 4.7 in)
75 mm
(3.0 in)
15 min
2 m ... 150 m
(6 ft - 10 in ... 492 ft)
English
7