Tiller handle type
1. Turn the throttle grip to the slow
position.
1
1. Throttle grip
2. Put the shift lever in the Neutral
position.
Run the engine for 2-3 minutes at
idling speed for cooling down if it
has been running at full speed.
3. Push the stop switch for a few sec-
onds to stop the engine.
1
1. Stop Switch
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
ENOF01107-0
2
ENOF00569-1
N
1
1. Control lever
2. Main switch key
2. Turn the main switch key to the OFF
position or push the stop switch. (
Do not forget to turn the key off).
1. ON
2. START
3. OFF
ENOW00869-0
WARNING
After stopping the engine:
Close the air vent screw on the fuel tank
cap.
Disconnect the fuel connector of the
engine and the fuel tank.
Disconnect the battery cord, after each
use.
ENGINE OPERATION
2
ENOF00881-1
3
1
2
ENOF00871-1
45
7