50
ENGINE OPERATION
ENON00921-0
Note
Before tilting the outboard motor up,
after stopping the motor leave it in the
running position for about a minute to
allow water to drain from inside the
engine.
ENOM00062-A
Manual Tilt type
Tilt up
With the shift lever in Neutral or For-
ward, fully tilt the motor up toward you
by holding the tilt handle provide at the
rear of the top cowl. Then slightly lower
the motor for locking in the up position.
7
1. Tilt lever
2. Tilt up position
3. Shallow water operating position
ENOM00063-A
Tilt down
Slightly tilt the motor up, and pull the
tilt lever toward you to release the tilt-
lock.
Then lower the motor slowly.
1. Tilt lever
N
2. Tilt up position
3. Tilt down position
ENOM00564-0
Manual Tilt RC type
Tilt up
1. Put the control lever to the Forward
ENOF00543-1
1
2
3
ENOF00544-0
1. Control lever
2. Tilt the outboard motor all the way
(F) position.
1
N
up until it is in tilted - up position.
1
2
3
ENOF00545-1
ENOF00879-A1