Technical Data; Dimensions; 220 - 240 Vac Information - Graco Mark X Manual De Instrucciones

Technical Data

Electric Motor
Power requirement
HP (W)
Maximum working pressure
Noise Level
Sound power
Sound pressure
Maximum delivery rating
Maximum tip size
Inlet paint strainer
Pump inlet size
Fluid outlet size
Wetted parts

Dimensions

Weight lb (kg)
142 (64)

220 - 240 Vac Information

• 220 - 240 Volt power is usually provided one of two
ways:
3-wire:
L1 Hot
L2 Hot
Ground
ti11524a
3-Pole, 4-Wire Grounding: 240V
L1 Hot
4-wire:
Neutral
L2 Hot
Ground
ti11526a
82
Height in. (cm)
29.5 (74,9)
2-Pole, 3-Wire Grounding: 240V
ti21499a
Black
240V
Red
G
Green/Bare
EQUIP.
X
GROUND
G
Look for markings on device:
Y
• X and Y are Hot
• G is Ground
L6-30R
ti21498a
Black
120V
White
120V
Red
G
Green/Bare
EQUIP.
GROUND
Look for markings on device:
X
• X and Y are Hot
G
W
• G is Ground
Y
• W is Neutral
L14-30R
PTFE, Nylon, polyurethane, UHMW polyethylene,
FKM, POM, acetal, leather, tungsten carbide,
carbon steel, stainless steel, chrome plating
Width in. (cm)
24 (61)
• Mark X 240 Volt is manufactured with a 3-wire plug
to be connected to a 3-wire receptacle
• Mark X 240 Volt can be connected to a 4-wire
receptacle with an adapter pigtail assembled by an
electrician as follows:
4-Wire
(120V/240V)
X - Black Hot
Y- Red Hot
G - Green Ground
W - White Neutral (Not
used)
Technical Data
220 - 240 Vac, 60 Hz, 14A
4.0 (2980)
3300 psi (22,8 MPa, 228 bar)
100 dBa
per ISO 3744
measured at 1 m (3,1 ft)
2.1 gpm (8,0 lpm)
1 gun with 0,045 in. tip
2 gun with 0,031 in. tip
3 gun with 0,027 in. tip
2464 micron (8 mesh)
stainless steel screen, reusable
1-11½ npsm
3/8 npt from fluid manifold
nickel-plated
Length in. (cm)
26 (66)
3-Wire
(240V)
X- Black Hot
Y - Red Hot
G - Green Ground
312649H
86 dBa