Inputing Archive Information - Gima ECG300G Manual De Uso

Select【OK】button, the system will apply new settings and return to sampling interface. Select
【Cancel】, the system will return to sampling interface without apply the new settings.
The each function of option is shown in the following table.
Item
AC Filter [ON]/[OFF]
EMG Filter [ON]/[OFF]
DFT Filter [ON]/[OFF]
Rhythm Lead Any one of 12 leads
Show Style [3 Leads]/[6Leads]/[12Leads]
Show Gain [2.5mm/mV]/[[5mm/mV]/[10mm/mV]
/[20mm/mV]/[40mm/mV]
Show Speed [5mm/s]/[6.25mm/s]/[10mm/s]/[12.5
mm/s]/[25mm/s]/[50mm/s]

13.3 Inputing Archive Information

If the system setup is different (refer to 13.8 System Setup), user can input the patient archive
(including ID, name, pacing, etc.) before or after sampling, or even input blank archive. The
input box as following:
User Manual
Optional content
21
Remark
Setting of using AC Filter or not
Setting of using EMG Filter or not
Setting of using DFT Filter or not
Setting the rhythm lead to print ECG in
rhythm print mode.
Setting of wave show style.
Setting of wave show gain.
Setting of wave
Auto-record and Rhythm record cannot
support
5mm/s,6.25mm/s,10mm/s,12.5mm/s
when printing.
show speed.