Preparations For Use - MSA Advantage 400 Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

QUANTITATIVE TEST – If a quantitative fit test is used, a fit factor that is at least 100 shall be
obtained before that respirator is assigned to an individual.
QUALITATIVE TEST - If a qualitative fit test is used, only validated protocols are acceptable.
The individual must pass a test designed to assess a fit factor of at least 100.
Regardless of facial dimensions and respirator sizing charts, respirator fit testing, either
qualitative or quantitative, must be performed to ensure the respirator selected provides an
adequate fit.
The user must perform a respirator fit check before using and follow all
warnings and limitations specified. Failure to do so can result in serious
personal injury or death.

PREPARATIONS FOR USE

The following inspection points must be checked before donning the respirator. A respirator that
fails the inspection must not be used. The respirator must be repaired or replaced.
1. Head harness strap and clips: Check to see that the strap still has elasticity. Inspect for
breaks or tears and make sure all adjusters are in place and working properly. Check that the
clips are not distorted and that the door clips provide tension on the strap.
2. Facepiece: Check facepiece for dirt, cracks, tears, or holes. Inspect the shape of the
facepiece for possible distortion that may occur from improper storage and make sure the
rubber is flexible, not stiff. Also, check the yoke for cracks.
3. Inhalation and exhalation valves: Check for cracks, tears, distortion, dirt, build-up of material
between valve and valve seat.
4. Cartridge bayonet connectors: Check to make sure connectors are in place and check for
cracks and damage.
5. Cartridges and filters: Make sure cartridges and filters are clean. Never try to clean a
cartridge or filter by washing it or using compressed air. Inspect cartridges for scratches,
cracks, or other damage, particularly the sealing bead around the bottom.
6
DESCRIPTION
" WARNING
MSA 904 (L) Rev. 1 - 10096834

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Advantage 420 serie

Tabla de contenido