Jøtul F 105 Instrucciones Para Instalación página 12

Ocultar thumbs Ver también para F 105:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
Fig. 11
A
12. Lift the stove from the pallet.
13. Set up the stove and adjust to a horizontal position with the
4 height adjustment screws. Use the hex key placed in the
bag of screws. Mark on the wall if there has to be a rear
outlet for fl ue pipe and external air supply. NB: Take into
account the height of the fl oor plate.
Approval label
Fig. 12
A
14. Take the approval label (A) out of the burn chamber and
fasten it with the screw (B), as displayed. Tighten the screw
with a cap wrench. NB: Do not cut off the wire used for
fastening the label.
12
A
A
B
External air supply through the fl oor
Fig. 13
A
1. Fasten the adapter (A) to the bottom side of the burn
chamber using the accompanying screws (B).
Fig. 14
B
C
2. Fasten the external air connector (A) to the adapter by
inserting the two screws (B) into the track and tightening
with the nuts (C).
B
B
B
A
C

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

F 105 bF 105 llF 105 slF 105 serie

Tabla de contenido