Jøtul F 105 Instrucciones Para Instalación página 18

ENGLISH
Fig. 31
8. Insert the fl ue pipe into the rear outlet.
NB: It is important for the joints/fl ue pipes to be sealed
completely. Air leaks may prevent them from operating
properly.
18
Product without convection plate
NB: If you will not use a convection plate, the product will have
different setup conditions (see fi g. 1).
Fig. 32
1. If you will not use the convection plate on the burn chamber,
screw the four screws (A) back in place. Use the hex key
placed in the bag of screws.
A
A