Exterior Maintenance; Servicing - Jøtul F 105 Instrucciones Para Instalación

Thoroughly clean the gasket grooves, apply ceramic glue
(available from your local Jøtul dealer) and press the gasket
well into place. The joint will dry quickly.

6.5 Exterior maintenance

Painted products may change colour after several years'
usage. The surface should be cleaned and brushed free of
any loose particles before new paint is applied.
Enamelled products must only be cleaned with a clean, dry
cloth. Do not use water and soap. Any stains can be removed
with a cleaning fl uid (oven cleaner etc.).

7.0 Servicing

Warning! Any unauthorised changes to the product are
illegal! Only original spare parts may be used!
7.1 Service/replacing parts in the burn
chamber
NB: Use tools with great care! The vermiculite plates may be
damaged if treated roughly.
Fig. 35
E
C
D
1. Baffl e: Lift the front edge of the baffl e (A) up and down and
twist it out of the burn chamber.
2. Exhaust defl ector: Lift the front edge of the exhaust
defl ector (B) up and down and twist it out of the burn
chamber.
3. Lift up the ash grate (D) in the middle slot in front and then
lift the ash pan out of the burn chamber
4. Remove the three screws holding the burn plate. Lift up
one of the sides of the burn plate and twist it out of the
burn chamber.
7.2 Replacing glass and gaskets in
the door
Fig. 36
B
1. Lift the front edge of the baffl e (A) up and down and twist it
A
E
A
out of the burn chamber.
ENGLISH
21