Decommissioning, Removal And Disposal - ProMinent DULCOTEST CLO 1 Instrucciones De Servicio

Decommissioning, Removal and Disposal

9

Decommissioning, Removal and Disposal

Users' qualifications: technical expert,
n
Ä Chapter 1.2 'Users' qualifica‐
see
tions ' on page 11
To decommission, disconnect the sensor,
pull it out of the flow gauge housing by
releasing the clamping screw and
unscrew the sensor cap. Remove all gel
electrolyte from the electrodes and sensor
cap under a stream of water and then
allow to dry dust-free; then loosely screw
on the sensor cap. To protect the elec‐
trodes, press the protective cap onto the
sensor cap.
Observe the run-in times before calibra‐
tion when recommissioning .
The decontaminated sensor can be
handed in at any branch of ProMinent for
disposal.
34