Publicidad
Idiomas disponibles
Idiomas disponibles
4
Assembly
Users' qualifications: trained qualified
n
personnel, see
qualifications ' on page 11
Ä Chapter 1.2 'Users'
Electrolyte filling
NOTICE!
Perform the following work over a sink
After this, carefully re-close the elec‐
trolyte bottle. Unclosed electrolyte
bottles may severely limit the storage
period of the electrolytes.
1.
Remove the red end cap and cut off
the top end of the spout with a
knife.
2.
Screw the sensor cap (1) and the
sensor cap protector (2) off from the
sensor shaft
2
Fig. 2: Sensor cap (1) with sensor cap
protector (2)
3.
With the sensor cap protector
plugged on, place the sensor cap
onto a working surface
ð The sensor cap protector seals
the bottom of the sensor cap.
Assembly
1
A0107
19
Publicidad
Capítulos
