Hr / Kcal Mode; Heart Rate Limits; Time And Date - Oregon Scientific SE128 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
Press MODE to switch between:
• Clock mode
• Alarm mode
• Stopwatch mode

HR / KCAL MODE

HEART RATE MEASURMENT
/
Press
KCAL to enter HR Measurement mode. Press
MODE
to return to previous mode.
NOTE
When no signals are received or the measurement is
out of range for five minutes, the receiver will automatically
return to the previous operating mode.

HEART RATE LIMITS

The heart rate limits help you determine if you are
exercising within your training zone.
If you go above your limits
If you go below your limits
To set the heart rate limits:
will flash
will flash
6
1. Press
/ KCAL to navigate to HR measurement
mode.
2. Press and hold MODE until
3. Press SET to choose the lower limit, then press
MODE to confirm.
4. Press SET to choose the upper limit
MODE to confirm.
NOTE
The upper limit must exceed the lower limit. The
transmitter will adjust the ranges automatically according to
the data entered. You can also activate the heart rate limit
alert function, so the transmitter will emit a beeping sound
when the limits are exceeded.
To activate the heart rate limits alarm:
/
1. Press
KCAL to Navigate to HR measurement
Mode.
/ KCAL
2. Press and hold
ICON
No Icon

TIME AND DATE

To set the time and date:
1. Press MODE to navigate to Clock mode.
2. Press and hold MODE to enter settings.
3. Press SET to scroll through the setting options. The
setting sequence is as follows: 12 / 24-hour time;
appears.
, then press
.
HIGH / LOW ALARM
On
Off

Publicidad

Tabla de contenido
loading

Tabla de contenido