Switching Between Main Modes; Clock Mode; Setting The Clock - Oregon Scientific SMARTHEART Instrucciones De Instalación Y Manual De Usuario

SWITCHING BETWEEN MAIN MODES

CLOCK
MODE
MODE
ALARM
MODE
MODE
ZONE
TIME
MODE
MODE
USER
PROFILE
MODE
There are 6 main operating modes for clock
time, alarm time, second zone time, user profile,
training program and stopwatch. Press MODE to switch
between modes.
SE190_M_EN_R3
CLOCK
MODE
MODE
STOPWATCH
MODE
MODE
TRAINING
PROGRAM
7
NOTE You cannot run the Timer or Stopwatch at the
same time. If you have been using the Timer and do not
reset it after use, you will not be able to view the main
mode stopwatch screen and vice-versa.
The modes are described in the sections that follow.

CLOCK MODE

SETTING THE CLOCK

The real-time clock is the default display for the watch.
To set the real-time clock:
SET
3. Press ST / SP / + to change the setting. Hold to
speed through the options. Press SET to confirm
and move on to the next setting.
4. Repeat step 3 to change other settings for this
mode.
5. The setting sequence is 12 / 24 hour clock format,
hour, minute, second, date format, year, month, date
and 2nd time zone.
7
2006.4.24, 3:23 PM
1. Press MODE to
switch to Clock
Mode.
2. Press and hold
SET until the first
setting flashes.