Accessories; Cleaning And Maintenance; Cleaning The Oven Exterior And Oven Accessories; Cleaning The Oven Interior - Pando PHC-943 Manual De Uso

Accessories

Do not leave any containers or food on the
oven floor. Always use the trays and racks
supplied with the oven.
To prepare yoghurt, place the jars on the oven
floor.
To cook any other food, insert the tray or rack
into the runners inside the oven.
1. Between two rails of the side supports or
on any of the extractable runners, if the
oven has them.

Cleaning and maintenance

Disconnect the appliance from the mains
power supply before any operation.
CLEANING THE OVEN EXTERIOR AND
OVEN ACCESSORIES
Clean the outside
accessories with warm soapy water or with a
mild detergent.
Take great care when cleaning stainless steel
or painted surfaces. Use only sponges or
cloths that do not scratch.

CLEANING THE OVEN INTERIOR

Clean the oven interior regularly to remove
traces of fat or food, which can later give off
smoke and odors and cause stains to appear.
Use nylon brushes or sponges with warm
soapy water to clean enameled surfaces such
as the bottom of the oven. Clean when the
oven is cold. Use oven cleaning products only
on enameled surfaces and always follow the
Do not clean the oven interior with steam
or pressurized-water cleaning equipment.
12
of the oven and
2. The rack and some of the trays have
retention grooves to prevent them from
accidentally being removed. Place these
grooves towards the back of the oven,
facing upwards Figure 4.
3. The surface of the rack on which the
container will rest must be below the side
rails. This prevents the container from
accidentally sliding. Figure 5.
Do not use metal scouring pads, wire brushes
or any utensil that can scratch the enamel.
Over time, certain types of food such as
tomatoes, vinegar and salt-baked dishes may
cause the enamel to change color. This is
normal and does not affect the functioning of
the oven. Do not try to remove these stains
using aggressive methods such as those
described, as this could cause permanent
damage to the surface.
Clean the oven seal regularly to eliminate all
traces of fat or food. This will prevent the seal
from becoming damaged and breaking
during subsequent cooking operations.
It is advisable to clean this seal without
removing it.
Dismantling the side supports
1. Remove all accessories from inside the
oven.
2. Completely loosen the nut at the front of
the fastening element (A), pull the
supports forward (B) and remove them.
Figure 10.
Assembling the supports
3. Insert the rear notch into the rear fastening
nut.
4. Fix the front fastening nut (C) in the front
notch of the support. Figure 11.