Oven Timer Operation - Pando PHC-943 Manual De Uso

INOXPAN S.L.

2.2. OVEN TIMER OPERATION

PROGRAMING COOKING TIME
1. Select a function and a cooking temperature using the oven commands.
2. Press or until the
"0_00" will appear on the display.
3. Select the time after which you want the alarm to sound by pressing
select the option. You will hear 2 beeps to confirm that the time has been set and the clock will
start counting down from the selected time. The
4. Once the cooking time is up, the oven will turn off, an alarm will sound and the word END will
appear and the symbol
until the symbol
5. Press to stop the alarm and turn off the
6. Set the controls to
You can change the remaining cooking time at any time by touching
starts to flash quickly. Press
point 3.
PROGRAMING THE COOKING STOP TIME
1. Select a cooking function and a temperature.
2. Press or until the
time will appear on the display.
3. Select the time after which you want the alarm to sound by pressing
confirm. You will hear 2 beeps to confirm that the time has been set and the selected cooking
stop time appears on the display. The
5. When the cycle is finished, the oven will turn itself off, an alarm will sound and the
will flash quickly.
6 Press to stop the alarm and turn off the
7. Set the controls to
You can change the remaining cooking time at any time by touching
starts to flash quickly. Press
symbol on the display starts flashing, then press
will flash. It will thus remain disconnected showing the word END,
is pressed, turning the oven on again.
position to turn off the oven.
to change the time. Then continue with the process indicated in
symbol on the display starts flashing, then press
position to turn off the oven.
to change the time.
symbol will flash slowly.
symbol. The oven will switch on again
symbol will flash slowly.
symbol. The oven will switch on again.
EN - 10
. The indication
o and press
or until the symbol
. The current
or and press
symbol
or until the symbol
to
to