Husqvarna TE125 2011 Caracteristicas - Uso - Mantenimiento página 76

BRAKES
The key components of the braking systems are: brake
master cylinder with its lever (front) or pedal (rear),
brake lines, calliper assembly and disc.
LEGEND
1. Front brake lever
2. Front brake master cylinder with fluid reservoir
3. Front brake line
4. Front brake calliper
5. Front brake disc
6. Rear brake fluid reservoir
7. Rear brake line
8. Rear brake calliper
9. Rear brake disc
10. Rear brake master cylinder
11. Rear brake control pedal
2
5
1
3
4
10
11
CHECKING THE BRAKING SYSTEM
Periodically check the braking system at the intervals
indicated in the "Scheduled Maintenance Chart ".
WARNING*:
Periodically check the connecting hoses (see
"Scheduled Maintenance Chart"): if the
hoses (3) and (7) are worn or cracked, their
replacement is advised.
8
9
7
EN - 33