Exploded View - Look 795 Manual De Instrucciones

EN
LOOK 1½" INTEGRATED HEADSET INSTALLATION
Headset specific feature:
The Look Head Fit 3 headset is a patented
system boasting several improvements.
It enables headset adjustment to be
dissociated from stem adjustment. This
makes these two functions independent,
which simplifies stem adjustment and
improves precision when adjusting the
headset.
What's more, this also increases bearing
and headset service life when high loads
are applied to the handlebar.
26

EXPLODED VIEW

Locking ring
Left-hand
Threaded insert
bearing seat
Compression cone
Right-hand
bearing seat
11/8" bearing
Pin (x1) and
plugs (x2)
HEAD TUBE
1½" bearing
HSC 8 FORK INSTALLATION
Before any use, read the instructions carefully in their entirety, observe the advice given in order
to make the most of the features of this high-quality product. LOOK reserves the right to change the
specifications of the product without prior notice, with the aim of improving it.
Fork presentation
LOOK forks include a tapered bearing seat designed to take it directly, thus eliminating the need to fit a
traditional fork cone.
It complies with standard EN 14 781.
Fig. c
36° tapered collar
1½'' dia.
Your frame is supplied with an HSC 8 fork pre-assembled with a LOOK Head Fit 3 headset. The clamping
ring that compresses the bearings has been factory-set to provide optimum operation and precision as
from first use.
If headset adjustment is required, please follow the advice in the "headset adjustment" section.
If the headset needs to be disassembled, please follow the advice in the "headset disassembly" section.
If the headset needs to be re-assembled, please follow the advice in the "headset re-assembly" section.
EN
27