Pre-Installation Check; Exploded View - Look C0264 616 / MY 08 Manual De Instrucciones

GB
Congratulations !
Thank you for choosing a LOOK frame and
fork assembly.
We would like to thank you for your
confidence in our products.
This LOOK frame and fork assembly is a very
technical French designed product.
Your LOOK 595 frame and HSC 6 fork
are identical to those supplied to major
professional teams and are inspected
throughout their manufacturing process so
that you will be ensured full satisfaction
with them.
All LOOK products comply with both
European and International standards.
We recommend that a professional per-
forms the installation and assembly of
your bicycle and its accessories.
It is important to read all instructions be-
fore starting, and respect all recommen-
dations given to achieve full benefit of this
high quality product.
LOOK reserves the right to change prod-
uct specifications without prior notice in
order to improve it.
26
Your frame:
Your frame was manufactured in accor-
dance with the specifications determined by
the LOOK design headquarters.
Your frame is delivered with the profiled
E Post seatpost (LOOK patent, fitted with a
carbon seat clamp), the height adjustment
kit, the clamping system, cable grommet
under the bottom bracket, interchangeable
rear derailleur hanger, water bottle carrier
screws, front derailleur braze on tab, and the
front brake attachment nut.
This built-in steering assembly frame is sup-
plied with the Aheadset carbon pivot fork,
the corresponding steering assembly, and
thickness rings and the steering assembly
adjustment cap.
The steering assembly is delivered com-
pletely assembled and greased.
INSTALLATION OF LOOK INTEGRATED HEADSET
Headset and frame characteristics:
The new headset Look «Head Fit»
is a patented system which brings
several improvements compared to the
Aheadset system. First of all, it makes
headset adjustment separate from stem
adjustment. These two functions become
independent, making stem adjustment
simpler and headset adjustment more
precise.
In addition, this headset is supplied
fully assembled on frame and includes
two patented dismountable lower and
upper bearing races. These are factory-
installed along with the headset and can
be replaced in case of damage, thus
preserving frame steering tube.
PRE-INSTALLATION CHECK
Your frame is now supplied with its fork
and headset Head Fit pre-adjusted.
• Frame + fork unit
• The fork is fitted to the frame with its
headset LOOK Head Fit.
• The headset is factory-adjusted. The
height adjuster sets the bearings under
compression to provide optimal operation
and precision on first use.
GB
EXPLODED VIEW
Height adjuster
Snap ring
Threaded insert
Compression cone
Bearing 1' 1/8
Upper bearing
ring
UPPER SECTION
STEERING TUBE
LOWER SECTION
Lower bearing
ring
Bearing 1"1/4
27