Dismantling And Repairs - Festo MTR Serie Instrucciones De Utilizacion

MTR−...
8

Dismantling and repairs

Please note
Masses which suddenly slide down may cause injury to people in the vicinity of
an MTR−... .
S Make sure that the work load of the driven linear axis is in a safe position.
Mounting position
Horizontal
Vertical
You can now remove the MTR−... from the linear axis.
S
If repairs are required:
Return the motor to Festo.
S
Only repair by Festo will guarantee that all safety standards are observed.
Assemble the MTR−... again as follows:
1. Push the slide or the cantilever of the linear axis into a safe position.
Festo MTR−... 0705e English
Safe position
Centre of stroke
Lower end position
M
h/2
M
o
u
h/2
25