Brita PROGUARD Coffee Manual De Instrucciones página 56

Step
Connection of PROGUARD Coffee
#2
Removal of blind plugs
How to remove the blind plugs at the indicated spots:
• Remove the John Guest locking clip
• Use DMfit's collet locking tool to push-back the collet and remove the blind plug
• Keep the locking clips and the blind plugs well for later use
2.1
• Plug the two threaded inserts into the water inlet connection and the filtrate outlet
connection
• Plug the 90° angle DMT fitting into the waste water outlet
2.2
EN
• Shut off the mains water supply valve
• Use the self-selected hose (step 1.5) to connect the mains water supply with the
shutoff valve.
• Make sure the shutoff valve is closed
2.3
56
3x
3x
3x