Brita PROGUARD Coffee Manual De Instrucciones página 58

Step
Connection of PROGUARD Coffee
#2
• Make sure the locking handle of PURITY C150 PROGUARD's firmly mounted filter head
is open. Open the locking handle by bringing its two blue handles in an inclined position
• Make sure the bleed valve is closed
• Make sure the sampling valve is closed
• Make sure the flushing head valve is closed
• Make sure the filtrate outlet valve is closed
• Make sure the valve for the automatic bypass is closed
2.6
• Flushing of the mineralisation cartridge PURITY C500 MinUp
Step • Connection of the enclosed flushing head to the membrane cartridge
#3 PURITY C150 PROGUARD
• Flushing of the post-filter cartridge PURITY C50 Fresh
Preparations for the flushing process:
EN
• Make sure the locking handle of the pre-filter head is open. The locking handle is open
when the two blue handles are in an inclined position
• Insert the mineralisation cartridge into the pre-filter head. Close the locking handle
of the pre-filter head by bringing its two blue handles in a horizontal position
• Set the bypass of the pre-filter head to 0% (Allen key size 4mm)
• Place a bucket (~10 litres) close to the mineralisation cartridge and hang its grey flushing
hose into the bucket
3.1
58
0 %