Brita PROGUARD Coffee Manual De Instrucciones página 64

• Flushing of the membrane cartridge PURITY C150 PROGUARD
Step
• Connection of the waste water tube
#5
• Connection of the FlowMeter
Connection of the FlowMeter:
• Screw the G 3/8" female thread of the 90° angle bend on the threaded insert that has
previously been plugged into the filtrate outlet connection of PROGUARD Coffee (step 2.2)
• Screw the FlowMeter on the 90° angle bend G 3/8" male thread
*** Make sure the imprinted arrow on the FlowMeter points away from the 90° angle
bend and goes with the water flow ***
• Use the separately supplied FlowMeter manual to start programming the FlowMeter.
You will be asked to enter the estimated yearly water consumption of the operated
coffee machine into the FlowMeter. Make sure to enter exactly the same figure that you
previously entered into the App (see chapter 5.1: App - BRITA Professional Filter Service).
• Put the FlowMeter on the top of the housing of PROGUARD Coffee. Do not yet attach
the FlowMeter with the velcro fastener
5.3
Use the hose DN8 G 3/8" – G 3/8" to connect the FlowMeter with the filter head of the
post-filter (inlet)
EN
5.4
64