Diamond DBT102/L Manual De Instrucciones página 37

Temperature Shock Freezing
GB
Select shock freezing cycle by pressing the
key until and
core probe into the product. Start the cycle by
pressing key
starting from 270' can be seen. During the shock
freezing cycle by pressing
detected by the core probe can be visualized; by
pressing that same key for 5 seconds temperature
detected by chamber probe can be visualized. If
on the display
Time Shock Freezing cycle
Select blast chilling by pressing
and LED lights turn on. Set the required
shock freezing time using keys
Start the cycle by pressing the
ENGLISH
1
2
LED lights turn on. Insert the
. On the display time decreasing
key temperature
message is
3
2 1
key until
and
key.
visualized (alternated to the time value) that
means that at the end of maximum 270', the
product temperature is not less than set - 18°C.
As soon as core probe detects the temperature of
-18°C, the shock-freezing time is completed and a
preserving cycle is automatically started: the
display of
intermitting sound and LED
confirm the correct conclusion of the cycle.
The alternate visualisation of
and
the cycle is completed past the MAX time of 270
minutes. Press
taken.
By pressing
chamber probe can be visualized.
Press to conclude the preservation cycle.
It is possible to know the passed time by pressing
key. It is possible to know the temperature
detected by the chamber probe by pressing
key.
At the end of the set time, the shock freezing time
is concluded and the preserving cycle is
automatically started: the display of
LED that goes on confirm the correct
conclusion of the cycle.
Press to conclude the preservation cycle.
.
12
message, an
that goes on
on the display shows that
to detect the effective time
key temperature detected by
, an intermitting sound and