Settings Menu - Astralpool VICTORIA PLUS SILENT VS Manual De Instrucciones

2.3 SETTINGS MENU

Press button to access the Settings Menu. You can access the Settings Menu from any Operating Mode
3
(STANDBY Mode, MANUAL Mode or AUTO Mode), both when the pump is on and off.
To browse through the Settings Menu options, use the Left and Right Arrow Buttons (
Settings Menu selected will flash. Press button
Menu. Once in the option under the Settings Menu, only the option selected will be displayed on the options
bar.
ON ACCESSING THE CONFIGURATION OF THE OPTION SELECTED IN THE SETTINGS MENU:
Press the Left and Right Arrow Buttons (
and Down Arrow Buttons (
Press button
end the set-up by going back to the Settings Menu.
Under the configuration of the setting selected, press button
Settings Menu without saving the changes made. Press button
to exit the Settings Menu in order to go back to the Operating Modes.
EXAMPLE OF AN OPTION SELECTED IN THE SETTINGS MENU:
STANDBY MODE
Adjustments
3
3
The option selected flashes
CLOCK DAY UNITS SETPOINT SET SAVING VIEW TIMER EXPERT
SETTINGS
1
Settings Menu
10
(Enter) to configure the option selected in the Settings
5
) to modify them.
10
(Enter) to accept/save the changes made and go on to the next setting or
5
AUTO MODE
2
Settings Menu scroll bar
) to browse through the settings and the Up
10
(Exit) to go back to the
4
(Exit) again if you wish
4
MANUAL MODE
5
Option entered in the Settings Menu
(the rest of the options are not displayed)
CLOCK
SETTINGS
4
Enter the configuration of the setting
Press the number of times necessary
to go back to the desired level
HMI VICTORIA PLUS SILENT VS CONTROL PANEL -
). The option on the
10
INSTRUCTION MANUAL