Astralpool VICTORIA PLUS SILENT VS Manual De Instrucciones página 25

3. HOW TO BLOCK THE CONTROL PANEL
In STANDBY Mode, MANUAL Mode or AUTO Mode, press the
same time for at least 3 seconds to block access to the control panel. Use the same sequence to unblock the
control panel.
When the control panel is blocked, only the CLOCK and DAY options in the Settings Menu will be enabled for
display and to change the settings.
Block the Control Panel in AUTO Mode so that the pump starts up the weekly cycle. When the
Control Panel is blocked, the pump will only work in AUTO Mode if a cycle has been programmed. If
the Control Panel is blocked in STANDBY Mode, the pump will not run until it has been unblocked.
CONTROL PANEL BLOCKING AND UNBLOCKING SEQUENCES
STANDBY MODE
AUTO MODE
MANUAL MODE
HMI VICTORIA PLUS SILENT VS CONTROL PANEL -
Blocked Control Panel Icon
Press
> 3 seconds
+
Blocked Control Panel in STANDBY Mode
Blocked Control Panel Icon
Press
> 3 seconds
+
Blocked Control Panel in AUTO Mode
Blocked Control Panel Icon
Press
> 3 seconds
MANUAL
+
Blocked Control Panel in MANUAL Mode
INSTRUCTION MANUAL
Settings and Enter buttons at the
3 5
Press > 3 seconds
Unblock Control Panel
Press > 3 seconds
Unblock Control Panel
Press > 3 seconds
Unblock Control Panel
+
+
+
25