Astralpool VICTORIA PLUS SILENT VS Manual De Instrucciones página 15

2.3.4 SETPOINT UNITS. CONFIGURATION OF SETPOINT UNITS
1. Select the SETPOINT UNITS option in the Settings Menu to display one of them.
2. Enter SETPOINT UNITS in the Settings Menu to modify the Setpoint Unit. The unit selected will flash.
3. Use the Up and Down Arrow Buttons (
• Rpm: Displays the motor's rotational speed in revolutions per minute.
• %: Displays the pump's operating capacity in % (100% = full load) depending on the motor's rota-
tional speed: (a full load is equal to the top working speed at 2,770 rpm).
4. Press button (Enter) to confirm the unit's value for Setpoint Operations. Once confirmed, it will go
5
back to the options under the Settings Menu.
Go back without making changes
Go back to the Settings Menu
HMI VICTORIA PLUS SILENT VS CONTROL PANEL -
) to modify the unit. Select from among the the following units:
10
Value of setting configured
CLOCK DAY UNITS SETPOINT SET SAVING VIEW TIMER EXPERT
SETTINGS
UNITS SETPOINT
SETTINGS
INSTRUCTION MANUAL
Changes setpoint unit
Confirm
15