Astralpool VICTORIA PLUS SILENT VS Manual De Instrucciones página 14

2.3.3 UNITS
1. Select the UNITS option in the Settings Menu to display the reading of the unit selected.
2. Enter UNITS in the Settings Menu to display the readings of the pump's operating settings. The setting
selected will flash.
3. Use the Up and Down Arrow Buttons (
• Rpm: Displays the motor's rotational speed in revolutions per minute.
• %: Displays the pump's operating capacity in % (35% = minimum load — 100% = maximum
load).
• W: Displays the motor's power consumption in watts.
• kWh: Displays the pump's overall power consumption in kilowatt hours. To reset the consumption meter,
keep button (Enter) pressed down for more than 5 seconds.
5.
• Hz: Displays the electrical frequency fed to the motor in hertz.
4. Press button (Enter) to select the reading to be displayed. Once confirmed, it will go back to the options
5.
under the Settings Menu.
CLOCK DAY UNITS SETPOINT SET SAVING VIEW TIMER EXPERT
SETTINGS
SETTINGS
Go back without making changes
Go back to the Settings Menu
14
) to display the various settings:
10
Value of setting configured
UNITS
Confirm
Display setting configured
W
W
Changes display setting
HMI VICTORIA PLUS SILENT VS CONTROL PANEL - INSTRUCTION MANUAL