Astralpool VICTORIA PLUS SILENT VS Manual De Instrucciones página 21

•
FRI: AUTO Mode for FRIDAYS
•
SAT: AUTO Mode for SATURDAYS
•
SUN: AUTO Mode for SUNDAYS
•
MON TUE WED THUR FRI SAT SUN: AUTO Mode every day of the week from MONDAY TO SUNDAY.
•
SAT SUN: AUTO Mode for weekends (SATURDAYS AND SUNDAYS).
Press button (Enter) to confirm the weekday selection you wish to configure.
5
3. Press the Left and Right Arrow Buttons (
selected will flash. In the time slot selected, press the Up and Down Arrow Buttons (
as necessary for the desired Setpoint Unit to be displayed or set the mode by directly pressing button
or of the Low, Medium or High Setpoint Unit.
7 8
CONFIGURATION OPTIONS AVAILABLE FOR THE SELECTION OF THE TIME SLOT IN AUTO MODE.
Low Setpoint Mode
Medium Setpoint Mode
High Setpoint Mode
4. Press button (Enter) to confirm the weekday option selected. Once confirmed, it will go back to the
5
weekday selection option. If required, the next day to be configured can be selected at this point or button
( Exit) pressed to go back to the options in theSettings Menu.
4
Only press button
The Low, Medium and High Setpoints can be configured from the SETPOINT option in the Settings
Menu (see Section 2.3.5).
HMI VICTORIA PLUS SILENT VS CONTROL PANEL -
) to move from one time slot to another. The time slot
10
Pump Off. While the time slot selected is flashing, the speed mode
changes. On moving from one time slot to another, the assigned speed
mode will not be displayed.
(Enter) button when the weekday selection has been completely finished.
5
INSTRUCTION MANUAL
) as many times
10
6
21